English Architects Table

English Architects’ Table, circa 1770
Made by Wm. R. Robertson in 1/12 scale, 2014

A type of table found in a Gentleman’s Library for drawing or displaying manuscripts or books. This utilitarian table is made in a simple Chippendale style popular during the Georgian period. The features include squared straight legs with internal Tuscan columns ending in brass castors. The internal edges have a delicate molding on the inside of the legs and aprons. Upon unlocking the lock with a tiny key, the front of the table including the front of the legs opens to reveal a leather covered writing surface. This has two half moon hand holds to help push it back into the body of the table exposing the inside of the drawer fitted with compartments. These are dadoed together and have cupid’s bows detailing the top edges. The trade label in the back compartment is printed on 18th c. paper and true to the period contains a scratched deletion. To the right side is a small hidden dovetailed drawer often used to contain ink. A pair of candle trays pull out from each side with cyma curves allowing the light emitted from the candles to be as far forward as possible, thereby illuminating the working surface without shadows. (This feature among others was discovered while sitting in my candlelit study examining two of these full scale tables). When a spring- loaded button latch on the opposite side is pushed, it allows the table top to tilt upwards. There is a hinged rest that fits in a series of carved notches to hold the top in position. One of the most fascinating features of this table is the book rest: when the table top is in the down position the rest is retracted, leaving a flat surface for drawing; when the table top is tilted upwards the rest rises up to support books or papers from falling off the slanted surface.

The miniature is made of Swiss pear wood, it is fully jointed with mortice and tenons, dowel, dovetail, dado and other joints. The moldings are cut with specially made cutters. The hardware including lock, latch, castors and spring mechanism are all machined out of brass and steel and function like the originals. The tables are stained and have a carefully hand rubbed lacquer finish. There is an engraved name plate on the bottom of the piece; it is also signed on the hinges and label.

and just in case you don’t believe me…… it is THAT small

and here is a picture as I was finishing them…..

Comments are closed.